Auto to manual conversion wiring with JZZ30 soarer 1jz-gte wiring loom

These are the wires you need to modify to make the car start.

They all come from the plug that goes into the gear selector of the auto.

You need to join the "black and "black/white" wires together to make a closed circuit so the car thinks its in neutral so the car will start!

Then join the "red/black and "yellow" wires from the same plug from the auto loom into the two pin plug on the manual box.

This makes the reverse lights work and bring up reverse on your dash!

 

Description: http://soarercentral.com/sc-forum/messages/51875/261390.jpg